Audio Tech 462Z Instructions d'exploitation télécharger pdf (Page 3)

-------------------------- 2 --------------------------

SPEAKER ON-OFF VOLUME CONTROLS

The ideal position for all speaker controls (Master-Room-Patio) is the fully clock-

wise position. The speakers are fully on at this setting. A setting lower than the

3 o’clock position will result in low level intercom communication even if the

intercom volume control at the Master Unit is fully on. To turn a speaker off turn

the volume control fully counterclockwise. At the “Off” setting the Room Speaker

cannot be monitored and will not be included in the Room Listening Function.

This guarantees privacy at each Room Speaker.

STATION TUNING-RADIO ON-OFF

For the 462 system, Room and Patio speakers with the optional “ST” (Station

Tuning) feature will have a Push to Tune label on the Volume Control. To turn

the radio on, press the volume control knob and hold for approximately two (2)

seconds. To turn the radio off, press the volume control knob and hold for ap-

proximately two (2) seconds. When the radio is on press the control knob and

immediately release to advance the tuner through the radio stations 1-6 in memory

previously selected. See RADIO STATION MEMORY (1-6). The 462X and

462Z have the station tuning feature integrated with the control buttons. To

change stations, press the

Room Talk and Room Listen buttons simultaneously;

at the master, use the memory buttons directly.

INTERCOM VOLUME CONTROL

This volume control should be adjusted with the Room Speaker at high settings

as described above. Communication and monitoring are most effective when

the Room Speaker volume control is fully on.

TONE CONTROL

This control adjusts the bass-treble tone of any selected program. Turn the con-

trol counterclockwise for more bass, and clockwise for more treble.

RADIO VOLUME CONTROL

This is the main volume control for audio program. It should be adjusted to a

slightly higher than comfort level with the Room Speaker at or near fully on to

your personal comfort.

CHIME VOLUME

The Door Chime volume is adjusted at the factory assuming a near fully on

loudness of the Room Speaker volume control. If a different chime volume is

desired, there is a labeled internal volume control on the back of the Master

Unit. Remove the Master Unit from the wall for adjustment with a small screw

driver.

HOME AUTOMATION RELAY (462Z)

RELAY: A relay (e.g. for door release) can be activated by pressing both LIS-

TEN and DOOR buttons simultaneously at any station.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Audio Tech 462Z Instructions d'exploitation Page 3