Audio Tech 462Z Instructions d'exploitation télécharger pdf (Page 8)

-------------------------- 7 --------------------------

RADIO AUTOMATIC ON-OFF (AUTO)

When the Auto button is pressed and immediately released the red LED above

the button will light and the automatic function will become active and remain

indefinitely active 24 hours a day until the Auto button is pressed to cancel the

automatic on and off function. When the auto function is active the radio (AM or

FM) will automatically turn on at the “On” Time setting and in sequence at the

“Off” Time setting. The AM or FM Station that will turn on and off is determined

by whichever broadcast band was selected last. The auto function will not turn

anything on or off but the AM and FM Radio.

BUILT-IN CD PLAYER

For masters with built-in CD player, the CD source button selects the CD player

in the Master as the music source. The CD player has been optimized for use in

a home music-intercom system. It features auto-load, auto-eject, double-play

repeat, edge loading, and simplified operation. Only four buttons are needed to

operate the player. With Double-Play Repeat, the CD will play twice through

and then stop. This allows for 2 hours of continuous play.

To play a CD - Press the CD source button to turn on the CD light. Once the CD

light is on, the player will be ready for automatic loading or will begin playing if a

CD is already in the player. Insert the edge of the CD into the vertical slot on the

right side of the Master. The CD should be inserted at the same angle as the

slope of the right side of the slot, with the label of the CD facing out. Be ready to

release the CD as soon as the player grips to pull it inside.

While the CD is playing, press the CD button to cause the player to pause (PAU—

will be displayed) until the CD button is pressed again to resume play. Push the

SEEK DOWN and SEEK UP buttons, located directly below the CD/II button, to

change tracks forward and backward. Track number will appear momentarily

on the display (example:” t02" for track 2). Press the DISPLAY TIME/DATA

button at any time to display the track number.

To stop play completely (so that the CD will start playing at t01 when the CD

button is pressed again), press OFF or any other SOURCE button (AM, FM,

AUX). To use MEMORY buttons, press FM or AM first. Remote station tuning

will work while the CD player is on, and will stop play of the CD. Stopping play

also resets the CD player mechanism. You can hear the player reset.

Press EJECT button to remove the CD. The EJECT button is located to the left

of the CD slot. The EJECT light will come on and the CD will automatically be

ejected at an angle that facilitates gripping the CD. The display will momentarily

show “Ejt”. If the CD is not removed within three seconds, it will be automatically

reloaded in order to protect the CD, but play will not resume. Pressing the Eject

button also resets the CD microprocessor.

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Audio Tech 462Z Instructions d'exploitation Page 8